Sewage Treatment Plant

Packaged Sewage Treatment Plant

Product Price: Rs 12 Lakh / pieceGet Best Price

Minimum Order Quantity: 1 piece

Product Brochure

Product Details:

Capacity (KLD/MLD)	500 KLD
Feed Flow Rate(m3/day or m3/hr)	101-500 m3/day
Application Industry	Residential & Commercial Building
Treatment Technology	Mixed Bed Bio Reactor(MBBR)
Impurities to be removed	Turbidity, Dissolved Minerals, Oil and Grease
Air Blower Power (kW)	1.5 kW
Weight	Up to 8 ton
Air Blower Count	2
Air Blower Flow (L/min)	60 L/min
Approximate Power Consumption (in kW)	5 kW
Installation Type	Prefabricated
Treatment Stages	Primary Treatment, Secondary Treatment, Preliminary Treatment

Operation Process
Solid Separation Zone
The first stage transforms the effluent solids to settled solids while allowing scum to float on the surface it is a primary sedimentation zone in which settled sludge is stabilized by anaerobic digestion. the treatment efficiency of the chamber is in the range of 30% BOD removal.

Aeration Zone
The second stage is the aerobic zone along with fab media inside the tank which in turn increases the surface area and retain microorganism long enough to digest the organic substance. clear water overflows to the next treatment chamber. Air is provided through blowers and higher contacting time with the slime on the fab media facilitates efficient digestion. bod removal is around 60%

Final sedimentation Zone
The final stage involves the sedimentation where organic wastes are settled in the sedimentation zone. the settled waste in the bottom of the tank is pumped back to the solid separation zone as a return sludge having active biomass MLSS to increase the efficiency of the system and to ensure that the effluent quality meets the stipulated PCB standards.

Specifications:-

Treatment Technique are Sequential Batch reactor, Activated Sludge
Industry are Industrial factory effluent treatment Plant , Hospital effluent treatment plant, Hotels,car washing,All factories, Apartments
Water Source are Commercial Waste Water, Industrial Effluent, Municipal Sewage

Technologies:-

Falling Film Brine Concentrators
Forced Circulation Crystallizer
Horizontal Spray Film Evaporator
Hybrid Systems with Membrane Pre-Concentrators
Biological Treatment
Solids Waste Handling

Application industries are also Sugar industries, dairy industries, lather industries, automobile industries, chemical/petroleum industries, paper industries, Pharmaceutical industries and slaughter houses.

Get Best QuoteRequest A Callback

Prefabricated Sewage Treatment Plant

Product Price: Rs 3 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Air Blower Power	1.5 kW
Industry	Sugar, Chemical, Petroleum Industry, etc
Installation Type	Prefabricated
Water Pump Power	1.5 kW
Feed Flow Rate	400 m3/day
Impurities to be removed	Oil and Grease, Dissolved Minerals, Turbidity, Color
Air Blower Count	2
Treatment Stages	Preliminary Treatment, Primary Treatment, Secondary Treatment, Tertiary Treatment, Disinfection

Package Sewage Treatment Plant of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Get Best QuoteRequest A Callback

Industrial Sewage Treatment Plant

Product Price: Rs 2 Lakh / PieceGet Best Price

Product Brochure

Product Details:

Feed Flow Rate(m3/day)	51-100 m3/day
Capacity (KLD)	50 KLD
Impurities to be removed	Color, etc, Dissolved Minerals, Oil and Grease
Deliver Type	PAN India
Installation Type	Completes Civil work with Installation
Warranty	1 Year
I Deal In	New Only
Air Blower Count	2
Control Module	Available
Country of Origin	Made in India

Package Sewage Treatment Plant of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Operation Process

1. Solid Separation Zone:

First stage transforms the effluent solids to settled solids while allowing scum tofloat on the surface; it is a primary sedimentation zone in which settled sludge is stabilized by anaerobic digestion.

The treatment efficiency of the chamber is in the range of 30% BOD removal.

2. Aeration Zone:

Second stage is the aerobic zone along with fab media inside the tank which in turn increases the surface area and retains microorganisms long enough to digest the organic substance. clear water overflows to the next treatment chamber. Air is provided through blowers and higher contacting time with the slime on the fab media facilitates efficient digestion. bod removal is around 60%

3. Final sedimentation Zone:

Final stage involves the sedimentation where organic wastes are settled in the sedimentation zone. the settled waste in the bottom of the tank is pumped back to the solid separation zone as a return sludge having active biomass MLSS to increase the efficiency of the system and to ensure that the effluent quality meets the stipulated PCB standards.

Get Best QuoteRequest A Callback

50 KLD Packaged Sewage Treatment Plant

Product Price: Rs 6.5 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Capacity (KLD/MLD)	50 KLD
Feed Flow Rate (cubic-meter/day)	50 m3/day
Approximate Power Consumption (in kW)	2 kW
Manufacturing Lead Time	30 days
Installation Type	Prefabricated
Air Blower Power (kW)	1.5 kW
Industry	Chemical/Petroleum Industry
Water Pump Power	1 kW

Package Sewage Treatment Plant of 50,kld capacity consisting of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones - the first zone to work as anaerobic septic zone created with the suitable partition of FRP; second zone to be created by the partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone has Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have a submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Get Best QuoteRequest A Callback

Underground Sewage Treatment Plant

Product Price: Rs 16.5 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Air Blower Power	5 kW
Feed Flow Rate (cubic-meter/day)	50 m3/day
Impurities to be removed	Turbidity, Oil and Grease, Dissolved Minerals
Approximate Power Consumption (in kW)	10 kW
Installation Type	Completes Civil work with Installation, Prefabricated
Air Blower Count	2
Approximate Power Consumption	7.5 kW
Overall Dimensions	2500 X 11000 mm

Package Sewage Treatment Plant of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Get Best QuoteRequest A Callback

Modular STP

Product Price: Rs 1 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Impurities to be removed	Oil and Grease, Dissolved Minerals
Feed Flow Rate	50-100 m3/day
Water Pump Power	1.5 kW
Air Blower Power (kW)	1.5 kW
Secondary Treatment Type	Moving Bed Bioreactor (MBBR)
Air Blower Count	2

Package Sewage Treatment Plant of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Get Best QuoteRequest A Callback

10 Kld Packaged Sewage Treatment Plant

Product Price: Rs 1 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Capacity	10 kld
Air Blower Power	1.5 kW
Impurities to be removed	Oil and Grease,Dissolved Minerals,Color
Feed Flow Rate	100 m3/day
Air Blower Count	2
Treatment Stages	Packaged Treatment

Package Sewage Treatment Plant of 10,kld capacity consisting of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Get Best QuoteRequest A Callback

Product Price: Rs 15 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Capacity (KLD)	500 KLD
Feed Flow Rate(m3/day)	101-500 m3/day
Impurities To Be Removed	Oil and Grease
Water Source	Sewage
Air Blower Power	0.5 to 5 HP
Industry	Domestic and Commercial
Installation Type	Completes Civil work with Installation
I Deal In	New Only
Installation Service	Yes
Voltage	440
Water Pump Power	1 kW
Automation Grade	Automatic
Filtration System	Sand & Carbon Filter
Secondary Treatment Type	Moving Bed Bioreactor (MBBR)
Air Blower Count	2
Control Module	Control Module Available
Manufacturing Lead Time	30 days
Treatment Stages	Primary Treatment
Country of Origin	Made in India
Material	FRP

Product DescriptionWe are famous in this domain for offering an extensive array of FRP Package STP Maintenance Service to our esteemed clients. We have received special acclaim for our maintenance service from the client. Moreover, offered services are admired due to their hassle-free execution, pocket-friendly price, and client-focused approach.

The overall aim of treating sewage is to produce an effluent that can be discharged to the environment while causing as little water pollution as possible, or to produce an effluent that can be reused in a useful manner. This is achieved by removing contaminants from the sewage. It is a form of waste management.
With regards to biological treatment of sewage, the treatment objectives can include various degrees of the following: transform dissolved and particulate biodegradable components (especially organic matter) into acceptable end products, transform and remove nutrients (nitrogen and phosphorus), remove or inactivate pathogenic organisms, and remove specific trace organic constituents (micropollutants).
Some types of sewage treatment produce sewage sludge which can be treated before safe disposal or reuse. Under certain circumstances, the treated sewage sludge might be termed "biosolids" and can be used as a fertilizer.

As sewage enters a plant for treatment, it flows through a screen, which removes large floating objects such as rags and sticks that might clog pipes or damage equipment. After sewage has been screened, it passes into a grit chamber, where cinders, sand, and small stones settle to the bottom.
The first thought for anyone planning a new development should be getting connected to mains sewers. They are typically the most cost-effective and reliable method of dealing with your wastewater. However, getting a mains sewer connection isn’t always possible. In some scenarios, the distance from the nearest sewer or the layout of the land can make it impossible to have your property serviced by a mains sewer. That’s where sewage treatment plants and other alternatives come in. The operation of a sewage treatment plant means that you can have one installed almost anywhere, as long as you have an electrical connection.
Advantages of a Sewage Treatment Plant

Reliable and unlikely to encounter problems with only regular maintenance
Can be installed even on challenging or compact sites
Cost-effective over time, with only installation, power and maintenance

We deal in Submerged Aerobic Fixed Film stp,Sequential Batch Reactor sewage treatment plant,mbr sewage treatment plant,MBBR sewage treatment plant,Non electric sewage treatment plant,sbr technology in stp,SBR sewage treatment plant,activated sludge process stp,MBBR technology sewage treatment plant.

Additional Information:

Item Code: JPSTP-50
Production Capacity: 30
Delivery Time: 30

Get Best QuoteRequest A Callback

50 KLD Portable Sewage Treatment Plant

Product Price: Rs 1 Lakh / PlantGet Best Price

Product Brochure

Product Details:

Capacity (KLD)	50 KLD
Feed Flow Rate(m3/day)	0-50 m3/day
Secondary Treatment Technology	Mixed Bed Bio Reactor(MBBR)
Air Blower Power	1.5 kW
Impurities to be removed	Oil and Grease,Dissolved Minerals,Turbidity
Automation Grade	Semi-Automatic
Treatment Stages	Preliminary Treatment,Primary Treatment,Disinfection,Secondary Treatment,Tertiary Treatment
Installation Type	Prefabricated
Air Blower Count	2
Control Module	Available
Water Pump Power	1.5 kW
Country of Origin	Made in India
Material	FRP

We are one of the manufacturer of FRP Package Sewage Treatment Plant

A sewage treatment plant is required for all residential and commercial areas. This process is similar to that of a septic tank. However, some additional mechanical components in the former prove a better choice resulting in cleaner and more environment-friendly effluent.Sewage treatment, also known as wastewater treatment, is used to remove contaminants from municipal wastewater. Various physical, biological, and chemical processes are used to treat water.
Small scale wastewater treatment is basically for domestic sewage. This is considered as the secondary treatment specifically designed to remove biological contaminants from water. Usual sources of these impurities are food waste, human waste, detergent, soap, etc.
Many sewage treatment plants in India have been constructed through government funding schemes such as the GAP and the YAP. ASP, UASB, and a series of WSP were the most preferred treatment technologies in earlier days. There are a number of newer treatment technologies that have come into use in recent times that include the MBBR, the FAB, the SBR, and the MBR. Newer technologies are gaining acceptance because of a low footprint and recyclable quality effluent although they are high energy intensive systems. Hence, a need exists for the development of efficient and sustainable technology that can provide recyclable quality treated water with low-operating costs, low capital costs, and a smaller footprint. The AnMBR could be such a technology, which can reduce energy demand for wastewater treatment. The AnMBR facilitates retention of microorganisms in the bioreactor and allows operation with high biomass concentration. Thus, AnMBRs are expected to provide a better quality of treated effluent with energy recovery in terms of biogas.Large industries, factories, and mills generate tons of sewage every day. Some of this waste is so harmful that if it is allowed to leave the neighborhood area, it can cause various diseases and contamination of land and water. It is easy to eliminate solid waste but it is not so easy to remove chemical and biological contaminants from these wastes, so they can be sent to safe areas. This is done with the help of sewage treatment plants. Here I am coming from some important factors related to the tertiary sewage treatment.

We deal in Submerged Aerobic Fixed Film stp,Sequential Batch Reactor sewage treatment plant,mbr sewage treatment plant,MBBR sewage treatment plant,Non electric sewage treatment plant,sbr technology in stp,SBR sewage treatment plant,activated sludge process stp,MBBR technology sewage treatment plant.

Get Best QuoteRequest A Callback

20 kld Industrial Sewage Treatment Plant

Product Price: Rs 1 Lakh / PieceGet Best Price

Product Brochure

Product Details:

Installation Type	Prefabricated
Feed Flow Rate(m3/day)	20 m3/day
Capacity (KLD)	20 KLD
Deliver Type	PAN India
Warranty	1 Year
I Deal In	New Only
Air Blower Count	2
Control Module	Available
Water Pump Power	1.5 kW
Country of Origin	Made in India

Package Sewage Treatment Plant of 20,kld capacity consisting of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Typical Application:-

National, Provincial and State Parks

Housing Developments

Residential

Factories

Hotel

Hospital

Institutions

Commercial Complex

Advantages:-

Eco Friendly

Rust Proof

light Weight

Durable

Leak Proof

Easy To Install

FRP Filament Wound Process

Excellent Performance

Massive Reduction BOD/COD

Packaged Sewage Treatment Plant Process

Get Best QuoteRequest A Callback

20 kld Sewage Treatment Plant

Product Price: Rs 2 Lakh / PieceGet Best Price

Minimum Order Quantity: 01 Piece

Product Brochure

Product Details:

Capacity (KLD)	20 KLD
Feed Flow Rate(m3/day or m3/hr)	20 m3/day
Water Pump Power	1.5 KW
Application Industry	Residential & Commercial Building
Treatment Technology	Mixed Bed Bio Reactor(MBBR)
Air Blower Power	0.5 kW
Impurities to be removed	Color, Dissolved Minerals, Oil and Grease
Automation Grade	Semi-Automatic
Treatment Stages	Primary Treatment, Secondary Treatment
Control Module	Available
Air Blower Count	2
Installation Type	Completes Civil work with Installation
Country of Origin	Made in India
Material	FRP

We also deal in domestic sewage treatment system, sewage treatment plant, wastewater treatment plant, Domestic wastewater treatment plant, Municipal Wastewater Treatment Plant

A sewage treatment plant is an industrial facility for the treatment of urban wastewater, largely from toilets and bathrooms, to produce a non-polluting effluent that can be used as part of another process or directly discharged into the environment (for example, rivers). They may also be known as "wastewater treatment works" or "wastewater treatment facilities", treated water as well as sludge are recycled. A WWTP is designed in accordance with the waste composition of the metropolitan area served.

In a sewage treatment plant, they treat the waste before it's discharged into the ocean.

The sewage treatment plant is divided into primary and secondary treatment stages. The primary stage takes place in the screening and grit removal system, where large solids are removed by grit chambers. The secondary stage takes place in several types of settlement tanks, where the activated sludge process is used to remove the organic matter from the wastewater. Treated effluent can then be discharged directly to surface water or further treated for reuse (biogas facilities for gas production or for irrigation as fertiliser, aquaculture facilities).

The sewage treatment plant is a handling plant for separating and reducing the polluting load of untreated municipal sewage brought into it by sewers. The main treatment process consists of sedimentation, where suspended matter falls to the bottom, followed by clarification and filtration. After treatment, the cleaned water, called effluent or secondary waste water, is discharged, either into streams via surface drains or into artificial bodies of water like lakes or reservoirs.

Get Best QuoteRequest A Callback

Portable Sewage Treatment Plant

Product Price: Rs 1 Lakh / plantGet Best Price

Minimum Order Quantity: 1 plant

Product Brochure

Product Details:

Feed Flow Rate (cubic-meter/day)	50-100 m3/day
Impurities to be removed	Oil and Grease, Dissolved Minerals, Color
Installation Type	Completes Civil work with Installation
Air Blower Count	2
Treatment Stages	Preliminary Treatment, Primary Treatment, Secondary Treatment
Impurities To Be Removed	Oil, Grease, Dissolved Minerals, TDS, Color, etc
Air Blower Power (kW)	1 kW

We are one of the manufacturer of FRP Package Sewage Treatment Plant

Get Best QuoteRequest A Callback

100 Kld Packaged Sewage Treatment Plant

Product Price: Rs 1 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Secondary Treatment Type	Moving Bed Bioreactor (MBBR),Fluidized Aerated Reactor
Installation Type	Completes Civil work with Installation
Capacity	100 kld
Air Blower Power	1.5 kW
Impurities to be removed	Oil and Grease,Dissolved Minerals,Turbidity
Feed Flow Rate	400 m3/day
Air Blower Count	2

Package Sewage Treatment Plant of 100,kld capacity consisting of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Get Best QuoteRequest A Callback

50 KLD Industrial Sewage Treatment Plant For Sugar Industry

Product Price: Rs 4.5 Lakh / pieceGet Best Price

Minimum Order Quantity: 1 piece

Product Brochure

Product Details:

Capacity (KLD)	50 KLD
Feed Flow Rate(m3/day)	0-50 m3/day
Application Industry	Sugar Industry
Air Blower Power	1-1.5 kW
Deliver Type	PAN India
Warranty	1 Year
I Deal In	New Only
Air Blower Count	2
Water Pump Power	1.5 kW
Country of Origin	Made in India
Voltage required	380 V

We offer Industrial Sewage Treatment Plant to our clients.

Operation Process

1. Solid Separation Zone:

First stage transforms the effluent solids to settled solids while allowing scum tofloat on the surface; it is a primary sedimentation zone in which settled sludge is stabilized by anaerobic digestion.

The treatment efficiency of the chamber is in the range of 30% BOD removal.

2. Aeration Zone:

Second stage is the aerobic zone along with fab media inside the tank which in turn increases the surface area and retains microorganisms long enough to digest the organic substance. clear water overflows to the next treatment chamber. Air is provided through blowers and higher contacting time with the slime on the fab media facilitates efficient digestion. bod removal is around 60%

3. Final sedimentation Zone:

Final stage involves the sedimentation where organic wastes are settled in the sedimentation zone. the settled waste in the bottom of the tank is pumped back to the solid separation zone as a return sludge having active biomass MLSS to increase the efficiency of the system and to ensure that the effluent quality meets the stipulated PCB standards.

Typical Application:-

National, Provincial and State Parks

Housing Developments

Residential

Factories

Hotel

Hospital

Institutions

Commercial Complex

Advantages:-

Eco Friendly

Rust Proof

light Weight

Durable

Leak Proof

Easy To Install

FRP Filament Wound Process

Excellent Performance

Massive Reduction BOD/COD

Packaged Sewage Treatment Plant Process

Get Best QuoteRequest A Callback

Industrial Stp Plant

Product Price: Rs 7.5 Lakh / pieceGet Best Price

Minimum Order Quantity: 1 piece

Product Brochure

Product Details:

Capacity (KLD)	10 KLD
Feed Flow Rate(m3/day)	0-50 m3/day
Deliver Type	PAN India
Warranty	1 Year
I Deal In	New Only
Country of Origin	Made in India

Industrial Sewage Treatment Plant of 10,kld capacity consisting of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Typical Application:-

National, Provincial and State Parks

Housing Developments

Residential

Factories

Hotel

Hospital

Institutions

Commercial Complex

Advantages:-

Eco Friendly

Rust Proof

light Weight

Durable

Leak Proof

Easy To Install

FRP Filament Wound Process

Excellent Performance

Massive Reduction BOD/COD

Packaged Sewage Treatment Plant Process

Get Best QuoteRequest A Callback

FRP Package Sewage Treatment Plant

Product Price: Rs 8 Lakh / pieceGet Best Price

Product Brochure

Product Details:

Installation Type	Completes Civil work with Installation
Country of Origin	Made in India

We are one of the manufacturer of FRP Package Sewage Treatment Plant

Get Best QuoteRequest A Callback

Modular Sewage Treatment Plant

Product Price: Rs 5 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:

Capacity (KLD/MLD)	100 KLD
Installation Type	Prefabricated
Feed Flow Rate(m3/day or m3/hr)	51-100 m3/day
Application Industry	Sugar Industry
Treatment Technology	Mixed Bed Bio Reactor(MBBR)
Impurities to be removed	Oil and Grease, Dissolved Minerals, Color, Turbidity
Automation Grade	Semi-Automatic
Treatment Stages	Preliminary Treatment, Primary Treatment, Secondary Treatment
Deliver Type	PAN India
Material Of Construction	Mild Steel
Warranty	1 Year
Air Blower Power	0.25 KW
Air Blower Count	2
Control Module	Available
Water Pump Power	1 kW
Country of Origin	Made in India

Package Sewage Treatment Plant of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Application industries also we applicable in Sugar Industry, Dairy Industry, Pharmaceutical Industry, Distillery, Paper Mills, Leather Industry, Chemical/Petroleum Industry, Automobile, Slaughter House

Get Best QuoteRequest A Callback

Underground STP

Product Price: Rs 6.55 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Industry	Sugar, Chemical, Petroleum Industry, Automobile, etc
Capacity	50 kld
Treatment Stages	Secondary Treatment, Preliminary Treatment, Primary Treatment, Tertiary Treatment, Disinfection
Approximate Power Consumption (in kW)	1-1.5 kW
Material	FRP
Air Blower Count	2
Color	Blue

We are one of the manufacturer of FRP Package Sewage Treatment Plant

Get Best QuoteRequest A Callback

Prefabricated Water Sewage Treatment Plant

Product Price: Rs 5 Lakh / PieceGet Best Price

Product Details:

Air Blower Power (kW)	1.5 kW
Secondary Treatment Type	Moving Bed Bioreactor (MBBR)
Approximate Power Consumption (in kW)	2 HP
Impurities to be removed	Oil and Grease, Color, Dissolved Minerals, Turbidity
Feed Flow Rate (cubic-meter/day)	400 m3/day
Air Blower Count	2
Water Pump Power	1 kW

Package Sewage Treatment Plant of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Get Best QuoteRequest A Callback

Containerized Sewage Treatment Plant

Product Price: Rs 2 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:

Treatment Stages	Preliminary Treatment, Tertiary Treatment, Disinfection, Primary Treatment, Secondary Treatment
Impurities To Be Removed	Turbidity, Dissolved Minerals, Oil and Grease
Water Pump Power	1.5 kW
Feed Flow Rate (cubic-meter/day)	1000 m3/day
Air Blower Count	2
Air Blower Power (kW)	1.5 kW
Brand	JRMS

Package Sewage Treatment Plant of Fiber glass reinforced Plastic (FRP) tank made by filament winding process from suitable polyester resin and glass fiber of the tank with suitable polyester resin and fiber glass to make tank suitable for underground application process variation. The tank to have three zones – first zone to work as anaerobic septic zone created with suitable partition of FRP; second zone to be created by partition of FRP with advanced fab media with a surface area to volume ratio of minimum of 400 Sq. Mtr / Cubic meter suitably encased free movement of the media within fixed space created by the net; the third zone to work as sedimentation zone in the remainder area of the tank. Aerobic zone have Twin Lobe Air Blowers installed for providing air flow coarse aeration in the zone for speedy reduction of BOD. Sedimentation zone have submersible pump of the for pumping the activated sludge back to the anaerobic zone by way of PVC pipes The whole plant to be controlled by automatic control panel made from sheet molded compound

Get Best QuoteRequest A Callback

FRP Underground Water Storage Tanks

Product Price: Rs 16 / Per LitreGet Best Price

Get Best QuoteRequest A Callback

Sewage Treatment Plant

Packaged Sewage Treatment Plant

Prefabricated Sewage Treatment Plant

Industrial Sewage Treatment Plant

50 KLD Packaged Sewage Treatment Plant

Underground Sewage Treatment Plant

Modular STP

10 Kld Packaged Sewage Treatment Plant